by Blaser Swisslube | Jan 16, 2022 | Education
Mixing of metalworking fluids: perfect concentration ensures stable emulsion No matter whether the emulsion is mixed manually or with automatic mixing equipment: Either way, a precise concentration is key for a stable emulsion and optimized lubrication An ideal water quality is a prerequisite for the mixing of metalworking fluids. Once the water quality is evaluated and – if necessary – improved, the mixing process can start. Determining the concentration The typical concentration lies between 3 and 15%. A lot of know-how and experience is needed to determine a recommended concentration as accurately as possible. In order to do just that, the Blaser experts evaluate all production processes, tools and materials in detail. It is important that the mixing process is performed in a correct way to ensure a stable emulsion with finely dispersed oil droplets. The mixing can either be done automatically or manually. Measuring the concentration (Video) Jetmix ensures best results The easiest and most precise option is the automatic mixing. By using automatic equipment such as the Blaser Swisslube Jetmix or Mini-Jetmix, the best results can be achieved. The automatic mixing equipment from Blaser maintains a constant concentration, and a specially shaped nozzle creates shockwaves that keep the emulsion droplets small to form a finely dispersed emulsion. It is important to ensure that the emulsion cannot enter the drinking water system – that can be guaranteed with the installation of a backflush valve. Jetmix for best results Refractometer in use Manual mixing: keep stirring! If the emulsion is mixed manually, it is crucial to always add the concentrate to the water while stirring. The concentration must be checked with a refractometer, which measures the content of a solution by the refraction of light. In fact, even if the emulsion is mixed automatically and the unit has preselected concentration scales, it is recommended to double-check the concentration with a refractometer. Please note that the product-specific refractometer factor must be taken into consideration. The real concentration can be calculated by multiplying the refractometer reading in %brix with the refractometer factor. The refractometer factor of each coolant can be found on the product-specific data sheets. Once the concentration is ideal, the emulsion can be used for the production processes. Only a perfect concentration ensures that the emulsion remains stable and provides optimized...
by Blaser Swisslube | Jan 16, 2022 | Education
What to do with your metalworking fluid during longer production stops? The machines may not be running, but chemistry and microbiology continue to be active in your water-miscible metalworking fluid. The fluid doesn’t circulate anymore and there’s no supply with fresh emulsion. All this can lead to severe problems such as bad smell, corrosion of machine parts and splitting of the emulsion. You therefore need to decide whether you maintain your coolant during the production stop or whether it’s a good opportunity to dispose your old coolant, clean your machines and get them ready for future production. Two options – maintain or dispose Water-miscible metalworking fluids cannot be left on their own. They need to be monitored and maintained regularly to ensure the stability of the emulsion. Cutting and grinding oils do not need any specific precautions. However, the production stop may be a good opportunity to clean the machines and change to a new oil. The following points help you decide whether to keep or dispose your metalworking fluid: Current conditions of the fluid Age of the fluid Volume of the fluid Expected duration of the production stop Available employees Please contact your Blaser representative to discuss which option is best for you. Equipment and methods in our microbiology laboratory It is crucial that you check and maintain the vital parameters of your coolant during production stops. For detailed instructions, see download section below or our online video tutorials. The most important measures are: Concentration: Keep at minimum 8%. This will ensure sufficient pH buffer to keep the emulsion stable. pH value: Make sure it remains within the recommended range. Circulation: Let the emulsion circulate in the tank for minimum 30 minutes per day. Skimmer: Keep it running. If you don’t have a skimmer, periodically remove tramp oil manually. Chip conveyor: Run it daily before starting the circulation. This will remove the chips and microchips that settle at the bottom of the tank. Machine cleaning – water-miscible metalworking fluids If you decide that the production stop is a good opportunity to dispose the old coolant, then proper cleaning of your machines is crucial to avoid contamination of the fresh emulsion. Watch the video for step-by-step instructions for cleaning and re-filling your machines. In the download section below, you can also find a PDF with all steps explained in detail. Machine cleaning – neat oils Although cutting and...
by Blaser Swisslube | Jan 16, 2022 | Education
DNA and flow cytometry in the microbiology laboratory – CSI from Hasle-Rüegsau Microscope The world of bacteria and fungi is extremely varied. In order to understand these organisms, in addition to specialist knowledge and an instinct for investigative research, we need the right instruments in our laboratory. We need effective equipment and closely tailored analysis methods to provide our customers with even faster and more competent information about the used emulsion. Find out more about DNA analysis, flow cytometry and microscopy. In my last post “What happens to the cutting and grinding fluid samples”, I introduced you to our standard analysis methods (plater & dipslide). These methods offer an overview of which microorganisms are capable of growing on a given nutrient medium. But the ability to grow is just one of many aspects in obtaining information about the (microbiological) condition of a cutting and grinding fluid. The analysis methods Unfortunately, there is still no way to determine precisely the number of existing microorganisms or their type and activity in a short space of time. However, there are methods that enable us to speed up certain analyses and obtain more information. For example flow cytometry. A specially developed measuring method means we can now deliver the cutting and grinding fluid analysis to our customers within a few hours instead of two days. This improvement saves time and money. Equipment and methods in our microbiology laboratory Flow cytometry A flow cytometer enables microorganisms to be fed through a narrow measuring chamber at high speed and measured with the help of several lasers. The cells generate a scattered light which is measured by sensors. The processed data allows us to gain a comprehensive picture of the sample and the microorganisms present. In addition, the cells to be measured can be stained with fluorescent dyes to show the structures or life processes (e.g. activity). The great advantage of this method is the speed at which analysis can take place. Instead of requiring an incubation period of two days, evaluation with flow cytometry can be carried out within a few hours. This speeds up the customer’s reaction time enormously. Every organism stores its genetic information in a molecule known as DNA (DeoxyriboNucleic Acid). This stores the information that a cell needs to master all life processes. This stored information differs from organism to organism and thus enables classification...
by Blaser Swisslube | Jan 16, 2022 | Education
Cutting and grinding fluid tests – performance comparisons among cutting and grinding fluids Precise analysis using the microscope in the Blaser Swisslube Technology Center My series explains which factors should be given special consideration when comparing cutting and grinding fluids. Having considered tool preparation and the right choice when replacing cutting and grinding fluids in the first two parts, the last part is about measuring performance and comparing different cutting and grinding fluids. What is particularly important when comparing sump life? All other factors, in addition to the cutting and grinding fluid, must be defined as precisely as possible. Good preparation is essential for reliable results and meaningful comparisons. In parts one and two, I already listed many factors that must be taken into account for a meaningful comparison of cutting and grinding fluids. I now intend to explain the procedure of our experiments in more detail in this part. Procedure of the performance test After the tools and cutting and grinding fluid have been prepared and checked, the performance test can begin. We machine material in our in-house Technology Center under clearly defined parameters until we have reached a predetermined flank wear, which marks the end of the sump life. We interrupt the machining process at fixed intervals, documenting the increase in tool wear using a microscope. It is essential that the machining conditions are always as identical as possible. The procedure of a cutting and grinding fluid test in the Blaser Technology Center To ensure reliable results, it is also important that the machining conditions are as good as possible. The main focus here is on clamping the workpiece, the tool and the machining strategy. Another essential factor is the pressure or the volume flow of the cutting and grinding fluid, which must be checked in advance to ensure consistency. Once all of these points have been checked, the test can begin. What must always be taken into account when performing cutting and grinding fluid tests in metalworking companies? 1. Process analysis: The real difference between cutting and grinding fluids can only be reliably shown through a structured approach and the prior identification of possible influencing factors. Even the most minor differences in material quality or tools can seriously falsify a comparison. 2. Process selection: Make sure to choose a stable process for comparison purposes. Otherwise, the...
by Blaser Swisslube | Jan 15, 2022 | Education
Cutting and grinding fluid tests – what needs to be considered in cutting and grinding fluid management? Blaser Swisslube’s experts are bringing efficient coolants to market. But not before the products are subjected to in-depth performance tests at the Blaser Swisslube Technology Center. The testing equipment now includes a microscope camera for measuring tool wear and the spike sensor system from pro-micron for measuring cutting force. This allows for faster collection of meaningful data that is of benefit to the user. You need to proceed with care when comparing cutting and grinding fluids with one another. In the first part I explained the points to be noted with materials and tools. We now turn our attention to the cutting and grinding fluid and its handling. The cleaning of the machine—before filling—is the key to the successful use of the cutting and grinding fluid. You’ll find plenty of information and tips on handling our cooling lubricants in our application videos. Blaser’s Competence Center Professional machine cleaning demonstration After the machine has been thoroughly cleaned, two factors are particularly important for subsequent filling (with water-miscible cutting and grinding fluid): The cutting and grinding fluid concentration Water quality The cutting and grinding fluid concentration The concentration with which the cutting and grinding fluid is applied influences both the performance and the stability of the emulsion. The refractometer factor must be taken into account when checking the concentration with the refractometer. This is always shown on the product label of our products. This factor is multiplied by the refractometer reading and gives the effective concentration of the cutting and grinding fluid. Checking concentration using a refractometer The influence of the refractometer factor. Example with factors 1.0 and 1.5. We always work with the same concentration during our machining tests in the Technology Center. For general machining, this is 8 percent. By contrast, the tests for grinding are run with a concentration of 4 percent. Please note the application limits on the data sheet of the respective product. The concentration is checked daily during the experiments. In order to ensure the reproducibility of the test results, the deviation from the target concentration must not exceed a maximum of 0.5% during the entire test period. Furthermore, the total amount of cutting and grinding fluid must not fluctuate excessively...
by Blaser Swisslube | May 29, 2021 | Education
Cutting and grinding fluid tests – how we test in the Technology Center The Research and Development laboratory at Blaser Swisslube At Blaser Swisslube, we have been testing our cutting and grinding fluids in our in-house Technology Center using the latest generation of CNC machines since 2009. There are many factors to consider in these experiments. The most important thing, however, is a clean and very precise approach. A good cutting and grinding fluid has many features. In my series, I’m going to explain what needs to be considered when performing tests on cooling and grinding fluids. In the first part, I’m going to talk about materials and tools. A good cutting and grinding fluid has many features. In my series, I’m going to explain what needs to be considered when performing tests on cooling and grinding fluids. In the first part, I’m going to talk about materials and tools. Several departments work together when a new cutting and grinding fluid is developed. On the one hand, there is our Product Management team, which assesses market requirements and orders new products for development on this basis. On the other hand, there is our Research and Development laboratory. Here our chemists work tirelessly on increasingly powerful, stable and compatible products. Last, but not least, we are pleased when we receive practical feedback and suggestions from our Customer Service, which we then use in further development. Cutting and grinding fluid tests – evaluation of strengths and weaknesses Of course, all chemical and biological features, as well as human and environmental compatibility, are recorded in the laboratory. The data already covers a very wide range of information. Performance in different materials can be estimated effectively using the tribological parameters. However, the tests in our Technology Center are vital in order to assess effective performance in practical machining applications. But what does performance mean in relation to a cutting and grinding fluid? One of the most important features is the influence on tool life with consistent parameters. In order to reliably determine this influence, we need to call on our extensive experience, our modern infrastructure and our ability to work with ultimate precision. The only factor that can change from test to test is the cutting and grinding fluid. In order to get closer to the customer and everyday practice, we have had our own Technology Center since 2009 where I’m...
Recent Comments